Series 80 Nylon Control Valves

Reliable and durable control and master valves.

Why Series 80 Nylon Control Valves

Easiest Operation And Lowest Maintenance Costs
New and improved manual selector allows for hassle-free internal bleed without manipulating the position of the solenoid. Innovative labyrinth inlet eliminates the need for internal filters, reducing service costs for end users, contractors and Distributors.
Flow Control Standard On All Models
Manual zone control from fully closed to maximum capacity at no extra charge
High Efficiency, Longer Lasting Solenoid
Inrush and holding current are 50-60% lower than the industry average which allows the industry’s longest wire runs from valve to controller. Low sensitivity to dirt and voltage fluctuations.

Proven Reliability with Reclaimed Water
Over a decade of field-proven, consistent performance under the harshest water conditions. Durable and corrosion-resistant materials.
2-Wire System Compatibility
Works with all major manufacturer 2-Wire control systems.

Residential or commercial landscape irrigation applications
For mild corrosive and mild acidity levels in the water
For remote control, master valve, automated operations
Reclaimed/reuse applications including municipally treated reclaimed water designated for irrigation

Recommended flow range:
¾” – 0.01 to 26 GPM
1” – 0.01 to 44 GPM
1 ½” – 0.25 to 110 GPM
2“ – 0.25 to 176 GPM
Minimum operating pressure: 7 psi
Maximum operating pressure: 150 psi
Water temperature: up to 140° F
Improved manual selector and encapsulated solenoid available on 3/4” and 1“ models only
24VAC solenoid standard +/- 10% voltage
Solenoid inrush current: 0.220A
Solenoid holding current: 0.095A
Optional Solenoids: 24VDC, 12VDC, 12VDC-latching and 120VAC
Integral stainless steel EasyClean^® filter for 1½” and 2” models only
Adjustable pressure regulator option available: 1.5″ and 2″ model
- Normally Closed Option: 3/4″ – 2″
- Normally Open Option: 1 1/2″ – 2″